In the case of a laundromat or commercial laundry in Malaysia, your machines are running throughout all the hours you are operational. Such usage leads to stress on particular parts of the machine, and when they give in, they do not make your life easier. The problem is not just about having one machine out of order, but having less capacity for the peak hours, more waiting lines, and possibly losing clients to other laundries.
Fortunately for you, commercial laundries have a relatively small number of vulnerable parts that wear out quicker than the other parts of the machines.
Contents
- What are the 5 Parts that Matters Most
- How to Reduce Part Failures Overall
- Steps to Take When a Part Fails
- Conclusion
- Frequently Asked Questions
What are the 5 Parts that Matters Most
The various components of the washing and drying machines do not fail at the same time. There are some that are supposed to last the lifetime of the machine whereas there are others that need to be replaced at intervals after being subjected to wear out by friction, heat, and other forms of wear and tear.
These five components are the most common source of unforeseen breakdowns in commercial laundry machines that operate on multiple loads throughout the day in Malaysia.
-
Drive Belts
What it does: Links the motor to the drum, enabling rotation of the drum while washing and drying clothes.
Why it fails: The continuous exposure to friction and tension causes the belt to wear out over time until it finally slips or breaks.
Indications:
- Motor operates but the drum does not move
- The smell of burning rubber during the operating process
- Signs of cracks or fraying on the surface of the belt
Why it is important in Malaysia in particular: Frequent use of washing machines, especially in urbanized laundromats, means that the belts will wear out much quicker than in other countries.
-
Bearings
Functionality: Helps to rotate the drum smoothly by reducing friction between moving parts.
Why it Fails: Frequent load-carrying rotation along with exposure to moisture tends to wear out the bearings over time.
Symptoms:
- Noise while rotating the machine
- Unusual vibration or movement of the drum
- Excessive noise in comparison to other machines
Consequences:
If ignored, a failing bearing can damage the adjacent parts, which will make the part replacement more costly.
-
Heating Elements
What it does: Produces the heat needed for the drying cycle in commercial dryers.
Why it fails: Heating elements endure constant heating and cooling cycles, and over time, this thermal stress causes the element to weaken or fail entirely.
Warning signs:
- Dryer runs a full cycle but clothes remain damp
- Noticeably longer drying times than usual
- Drum feels only slightly warm instead of hot
Why it matters: A failing heating element often isn’t obvious immediately — customers may simply notice their laundry isn’t drying properly, which can quietly hurt your reputation before you even realise there’s an issue.
Know more about LaundryMate Commercial Tumble Dryer
-
Control Boards
Function: Cycle settings, timing, and interaction between various parts of the machine.
Why it fails: Control boards are electronic parts, and any problem can occur because of voltage surges, moisture, and just age.
Signs:
- Won’t start even when plugged in
- Cycle will skip some steps or work erratically
- Display problems, unresponsive buttons
Why it matters: The humid conditions in Malaysia may affect electronic parts more than in drier regions. Ventilation around the machine is crucial for its longevity.
-
Valves and Hoses
Function: Regulates the water that enters your washing machine during filling.
Why it fails: Pressure from the constant water intake and mineral build-up can result in weak or leaking valves.
Signs:
- Machine takes an unusually long time to fill up
- Leaking near the water inlet valve
- Water level inconsistencies during cycles
Why it matters: A small water leak may not appear to be much of an issue initially, but can cause more problems in the long run.
Also Know About LaundryMate YZD Series Flatwork Ironer
How to Reduce Part Failures Overall
These parts will eventually have to be replaced no matter what maintenance routine you follow. However, there are some ways to make sure that your parts last as long as possible:
- Have a proper cleaning routine – lint accumulation and moisture make the parts deteriorate faster
- Don’t overload your machines – working them above their capacity makes belts, bearings, and motors work extra hard
- Fix even the smallest problems immediately – it’s much easier and cheaper to fix a small problem rather than waiting until it becomes a large one
- Make sure your machines are well-ventilated, particularly in hot and humid Malaysia
- Purchase original parts only – they will most likely last longer and won’t overload other parts
Steps to Take When a Part Fails |
|
Conclusion
In most cases in Malaysia, faults in commercial washers are always related to only a few key components such as the drive belt, bearing, heater, control board, and water valve. Knowing what all of these are responsible for, being able to spot an emerging issue early on, and addressing it promptly is very important if you want to prevent downtime.
Launch Laundry has been providing laundry service companies in Malaysia since 2013 with genuine spare parts for reliable commercial equipment.
Frequently Asked Questions
What is the most common laundry machine part that fails?
It would be difficult not to break drive belts and bearings since there is much movement and friction happening in commercial laundry settings. The good news is that checking the machine on a regular basis will help identify such problems beforehand.
How can I tell if my dryer’s heating element has failed?
A typical symptom of a problem is a cycle that finishes without clothes being completely dried and increased drying time. In case the drum is a little bit warm, then most likely the heating element is at fault.
Does Malaysia’s climate affect laundry machine parts differently?
Yes, especially for control boards and other electric parts since higher humidity will affect them faster. Therefore, good ventilation of the machine and repairing any faults as soon as possible are very important.
Should I repair or replace a machine with a failed part?
Most of the time, for most commercial dryers it is cheaper to replace the faulty part than to buy a new machine, especially if the machine is maintained properly. Replacement of the whole unit should be considered for older machines with other recurrent faults.
Where can I find genuine spare parts in Malaysia?
Launch Laundry is providing genuine spare parts for commercial laundry makes throughout Malaysia with quicker availability and genuine spare parts according to manufacturers’ specifications.